Metal Removal and Recovery from Mining Wastewater and E-waste Leachate
Av Suthee Janyasuthiwong, 2020.Del av serien IHE Delft PhD Thesis Series.
Metal contamination in the environment is a persisting global issue. The metal reservoirs in the earth have declined due to society?s needs and due to uncontrolled mining activities. Therefore, the idea to recover metals from waste streams has emerged.
In this thesis, cost competitive technologies such as adsorption using agro-wastes and precipitation using an inverse fluidized bed (IFB) reactor were investigated, with special emphasis on the recovery of base metals. Groundnut shell showed good potential for metal (Cu, Pb and Zn) removal. From artificial neural network modeling, the performance of the sulfate reducing bacteria (SRB) was found to be strongly pH dependent; the removal efficiency of Cu and Zn in the IFB at pH 5.0 was >97%. Electronic waste is a good candidate as secondary metal resource. The recovery of Cu from computer printed circuited boards (PCBs) using biogenic sulfide precipitation was investigated as well. Using this technology, Cu could be recovered at ~0.48 g Cu/g PCBs.
Ikke tilgjengelig for Klikk&Hent
Midlertidig tomt på lager
Bestillingsvare. Forventes sendt om ca 10 dager
Metal Removal and Recovery from Mining Wastewater and E-waste Leachate
Av Suthee Janyasuthiwong, 2020.Del av serien IHE Delft PhD Thesis Series.
Metal contamination in the environment is a persisting global issue. The metal reservoirs in the earth have declined due to society?s needs and due to uncontrolled mining activities. Therefore, the idea to recover metals from waste streams has emerged.
In this thesis, cost competitive technologies such as adsorption using agro-wastes and precipitation using an inverse fluidized bed (IFB) reactor were investigated, with special emphasis on the recovery of base metals. Groundnut shell showed good potential for metal (Cu, Pb and Zn) removal. From artificial neural network modeling, the performance of the sulfate reducing bacteria (SRB) was found to be strongly pH dependent; the removal efficiency of Cu and Zn in the IFB at pH 5.0 was >97%. Electronic waste is a good candidate as secondary metal resource. The recovery of Cu from computer printed circuited boards (PCBs) using biogenic sulfide precipitation was investigated as well. Using this technology, Cu could be recovered at ~0.48 g Cu/g PCBs.
Ikke tilgjengelig for Klikk&Hent
Midlertidig tomt på lager
Bestillingsvare. Forventes sendt om ca 10 dager
Ved å fullføre kjøpet aksepterer du kjøpsvilkårene.
